<![CDATA[Installation Problem]]>Hi. Trying to install SailLogger on CerboGX/Signal K server but with no success. Failed message.
Servers already rebooted. At first try when SailLogger was been installed, the server was rebooted and now always failed. Is there any way to clean the last installation try, by SSH or other way?
Thank you.

]]>https://community.saillogger.com/topic/116/installation-problemRSS for NodeThu, 16 Apr 2026 20:53:35 GMTTue, 10 Jun 2025 12:33:59 GMT60<![CDATA[Reply to Installation Problem on Fri, 04 Jul 2025 22:05:46 GMT]]>This was resolved in a different thread. Upgrading to the latest Victron firmware and installing Saillogger plugin 4.2.1 or later will work.

]]>https://community.saillogger.com/post/441https://community.saillogger.com/post/441Fri, 04 Jul 2025 22:05:46 GMT<![CDATA[Reply to Installation Problem on Fri, 04 Jul 2025 20:30:46 GMT]]>Hello to all saillogger friends, unfortunately I had not read this post before and I installed the 4.2.1 update which obviously did not install. However, there is a variant in my case that I would like to report, I still have version 3.55 and although this version is reported as the one on which 4.2.1 works, in my case it is not installed, could there be a solution in my case?

]]>https://community.saillogger.com/post/434https://community.saillogger.com/post/434Fri, 04 Jul 2025 20:30:46 GMT<![CDATA[Reply to Installation Problem on Fri, 27 Jun 2025 04:28:17 GMT]]>@jonnys This issue has been resolved in Saillogger Signal K plugin version 4.2.1. In collaboration with Victron, we fixed it by rebuilding the dependency in a different way. Please install Signal K Saillogger plugin version 4.2.1 and let us see if you see any issues.

]]>https://community.saillogger.com/post/428https://community.saillogger.com/post/428Fri, 27 Jun 2025 04:28:17 GMT<![CDATA[Reply to Installation Problem on Thu, 26 Jun 2025 08:11:11 GMT]]>Thanks for the update. I experienced the same problem with 3.60 even after a factory reset of cerbo.

]]>https://community.saillogger.com/post/427https://community.saillogger.com/post/427Thu, 26 Jun 2025 08:11:11 GMT<![CDATA[Reply to Installation Problem on Thu, 26 Jun 2025 04:19:25 GMT]]>Thanks, @Gerler. It turns out the problem is specific to the latest Venus OS (v3.62). Appreciate you uncovering the workaround! We’re coordinating with Victron on a permanent fix. In the meantime, we’ve posted the details here:

Link Preview Image
FIXED: Saillogger plugin fails to install on Venus OS v3.62

IMPORTANT NOTE: This issue has been resolved in Saillogger Signal K plugin version 4.2.1. In collaboration with Victron, we identified the root cause and fix...

favicon

Saillogger Community (community.saillogger.com)

]]>https://community.saillogger.com/post/426https://community.saillogger.com/post/426Thu, 26 Jun 2025 04:19:25 GMT<![CDATA[Reply to Installation Problem on Mon, 16 Jun 2025 13:44:02 GMT]]>Yep, very awkward. An I did a factory reset on Cerbo GX many times and tried with minimal configuration parameters and firmware update. At Signal K Server, just security config, nmea 2000 connection and derived data plugin and always same error. So last resource was to dig at logs with AI and that whtas solved.

]]>https://community.saillogger.com/post/414https://community.saillogger.com/post/414Mon, 16 Jun 2025 13:44:02 GMT<![CDATA[Reply to Installation Problem on Fri, 13 Jun 2025 03:38:40 GMT]]>Ok, glad it is solved but this is super awkward, Saillogger plugin has absolutely nothing to do with Python. There must be something else happening in the system, but not sure what it might have been.

]]>https://community.saillogger.com/post/413https://community.saillogger.com/post/413Fri, 13 Jun 2025 03:38:40 GMT<![CDATA[Reply to Installation Problem on Thu, 12 Jun 2025 00:08:33 GMT]]>Hello there. After logs analysis, Python update solved the issue.
SH at Cerbo and run this commands:
opkg update
opkg install python3-pip

Take more than 1 hour but worked fine.
Thanks

]]>https://community.saillogger.com/post/412https://community.saillogger.com/post/412Thu, 12 Jun 2025 00:08:33 GMT<![CDATA[Reply to Installation Problem on Wed, 11 Jun 2025 17:30:08 GMT]]>image.png

]]>https://community.saillogger.com/post/411https://community.saillogger.com/post/411Wed, 11 Jun 2025 17:30:08 GMT<![CDATA[Reply to Installation Problem on Wed, 11 Jun 2025 17:26:47 GMT]]>Let me know if this helps:

image.png

]]>https://community.saillogger.com/post/410https://community.saillogger.com/post/410Wed, 11 Jun 2025 17:26:47 GMT<![CDATA[Reply to Installation Problem on Wed, 11 Jun 2025 12:15:07 GMT]]>Update: Did a clean install on Cerbo GX, Updated to 3.60 firmaware Version. Started Signal K Server. Just configure user privileges and tried to install only Saillogger. Get the same Failed message.

]]>https://community.saillogger.com/post/409https://community.saillogger.com/post/409Wed, 11 Jun 2025 12:15:07 GMT<![CDATA[Reply to Installation Problem on Wed, 11 Jun 2025 11:44:12 GMT]]>Installing:

96f6abba-49f7-4b3c-8641-6d5725437d17-image.png

And Failed after 2/3 minutes:

32037559-ab8d-462d-a5a4-e8d4448505c8-image.png

]]>https://community.saillogger.com/post/408https://community.saillogger.com/post/408Wed, 11 Jun 2025 11:44:12 GMT<![CDATA[Reply to Installation Problem on Tue, 10 Jun 2025 23:12:04 GMT]]>That's odd, what is the error message you are seeing?

]]>https://community.saillogger.com/post/407https://community.saillogger.com/post/407Tue, 10 Jun 2025 23:12:04 GMT<![CDATA[Reply to Installation Problem on Tue, 10 Jun 2025 14:34:00 GMT]]>Hi @admin, the process to create a clean SignalK Server works perfect.
Just after I tried to install Saillogger plugin, and after 2 or 3 minutes it failed. Same as before.. Any place else I should remove something? Thanks.

]]>https://community.saillogger.com/post/406https://community.saillogger.com/post/406Tue, 10 Jun 2025 14:34:00 GMT<![CDATA[Reply to Installation Problem on Tue, 10 Jun 2025 14:02:33 GMT]]>Hi @Gerler , you can create a fresh installation of Signal K using SSH. Please see this thread for more details.

]]>https://community.saillogger.com/post/404https://community.saillogger.com/post/404Tue, 10 Jun 2025 14:02:33 GMT