I captured the reported hours on port and starboard engines as we started and ended our journey and confirmed the same data was on the signalK side and the engine side for both.

Start Port: 2238.1 Starboard: 2233.8
Stop Port: 2241.5 Starboard: 2237.2

However, the log for our journey does not reflect this data.

Both engines were running the entire journey. Note that the start hours on both are before I started the engines for the trip, while the end hours are very close -- probably because the boat stopped moving before I shut down the engines.

Is there something I can do to fix this on my end?