<![CDATA[Depth transducer offset?]]>Hi - Saillogger seems to be using the absolute depth value from my transducer rather than the offset actual depth. So in my case, the transducer is about 2' below the waterline and so saillogger is reporting an artificially low value. Is there any way to incorporate the adjusted value or to configure an offset in saillogger so that alarms and reported depth agree with the on-board displays? Thanks!

]]>https://community.saillogger.com/topic/42/depth-transducer-offsetRSS for NodeSun, 15 Mar 2026 08:17:12 GMTSun, 14 Apr 2024 14:47:07 GMT60<![CDATA[Reply to Depth transducer offset? on Thu, 13 Nov 2025 04:01:59 GMT]]>Works fine for me obviously for below surface (all other make no sense)

]]>https://community.saillogger.com/post/568https://community.saillogger.com/post/568Thu, 13 Nov 2025 04:01:59 GMT<![CDATA[Reply to Depth transducer offset? on Sun, 14 Apr 2024 14:50:57 GMT]]>Hi, yes, this is configurable from the Signal K plugin. Go to plugin configuration, and change the value under Monitoring data source for depth.

Sounds like you want to use environment.depth.belowSurface, make sure it is available in the Data Browser.

Save the configuration and restart Signal K for the changes to take effect and all should be good!

]]>https://community.saillogger.com/post/92https://community.saillogger.com/post/92Sun, 14 Apr 2024 14:50:57 GMT