Saillogger Community

@admin Thank you for the work!!!

Good morning,

I realized on a navigation that I had had GPS problems, and so the log of this course is wrong !!! I actually realized that 210 NM and not 1819.8 NM. Looking at the time lapse we see that from 160 NM the problem happens.

Can we correct this log without canceling it?

Https://saillogger.com/log/027518

Thanks

OK thank you it's work perfectly !!! Very nice ...

Thank you for your answer

My Garmin system only gives me the apparent wind!
So I installed the dérived-data plugin but how to activate True Wind Direction and True Wind Angle under Wind section? Nothing has changed the plugin!

Thanks

Hello

I'm trying to have the real wind and true wind direction data but I don't know how to do it!!!

I installed the derived data plugin but after?.

Thank you for your help

Yes !!!!! Thank you so much ....

Hello community!
I need help to understand my connection problem to Server K.
I am on a sailing catamaran.
I have a Cerbo GX MK2 from 2024, connected with an official VictronVE.Can to NMEA2000 Micro-C male cable, plugged into the VE.Can port 1 socket to the NMEA 2000 network under GARMIN system (MFD 8412 and 8410).
I have a WiFi NMEA 2000 Interface - NMEA Network - YDWG-02N, on a TpLink Archer 600 router.
On the Garmin 8412 I can see the list of Victron devices on the NMEA 2000 network, on the Cerbo I can see the Garmin devices on Port 1.
When I connect my tablet to the Cerbo via Navionics I only receive the GPS position and not the AIS or the probes !!!!
When I activate the K signal the line: n2k-on-ve.can-socket is not yellow and therefore I cannot connect to Saillogger ...
If anyone has any idea why I can't do it ???
Thank you all for your attention