FIXED: Saillogger plugin fails to install on Venus OS v3.62
-
IMPORTANT NOTE: This issue has been resolved in Saillogger Signal K plugin version 4.2.1. In collaboration with Victron, we identified the root cause and fixed it by rebuilding the dependency. Please install Signal K Saillogger plugin version 4.2.1 or later.
The latest Victron Venus OS release (v3.62) misses a critical package that prevents the Saillogger plugin from installing in Signal K (see attached screenshot).
We’re working with Victron on a fix. In the meantime, please use one of these workarounds:
1. If you haven’t upgraded yet: hold off on updating to v3.62 until the issue is resolved. We’ll post an update as soon as a fix is available.
2. If you’re already on v3.62: downgrade to a previous version. On the Victron GX display go to Settings → Firmware → Stored Backup Firmware and choose an older release.
3. If downgrading isn’t possible: install the missing package via SSH:
3.1 Enable SSH access by following these instructions and ssh to your Victron GX device using a terminal.
3.2 Run/opt/victronenergy/swupdate-scripts/remount-rw.shto remount the filesystem read-write.
3.3 Executeopkg update, thenopkg install python3-pip
3.4 Exit the terminal and install the Saillogger plugin normally.We apologize for the inconvenience and thank @Gerler for identifying the workaround in step 3.
This post will be updated once the fix is released in Venus OS.
-
A admin pinned this topic
-
A admin referenced this topic
-
A admin referenced this topic
-
Hello to all saillogger friends, unfortunately I had not read this post before and I installed the 4.2.1 update which obviously did not install. However, there is a variant in my case that I would like to report, I still have version 3.55 and although this version is reported as the one on which 4.2.1 works, in my case it is not installed, could there be a solution in my case?
-