Depth measurement resolution
-
Hello,
It seems like the depth measurement could use a little more resolution. It only displays in foot increments and is nowhere near sinusoidal in shape. The source is I'm using is
environment.depth.belowSurface.
With a custom monitor using the same source I get the same results. Our boat has a draft of a bit less than two feet so a 1/10th ft resolution would be welcome.ls this a setting that would be made in Signal K? I am two hours from the boat and can't look right now, but do hope to get there this coming weekend.
If it makes a difference I'm using a Cerbo GX mk2 and the depth gauge is an Airmar dst810.
Thanks for any help,
digger
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login