Depth transducer offset?
-
Hi - Saillogger seems to be using the absolute depth value from my transducer rather than the offset actual depth. So in my case, the transducer is about 2' below the waterline and so saillogger is reporting an artificially low value. Is there any way to incorporate the adjusted value or to configure an offset in saillogger so that alarms and reported depth agree with the on-board displays? Thanks!
-
Hi, yes, this is configurable from the Signal K plugin. Go to plugin configuration, and change the value under
Monitoring data source for depth.Sounds like you want to use
environment.depth.belowSurface, make sure it is available in the Data Browser.Save the configuration and restart Signal K for the changes to take effect and all should be good!
-
Works fine for me obviously for below surface (all other make no sense)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login