Cumulative Track?

[SV_Atlas]

Hello!

Is it possible to display our entire cumulative track on our real-time monitoring map page? Similar to the PredictWind tracker or, if possible, a way to toggle the entire track on/off so we can see where we've been (rather than the log page and each trip segment).

Thank you very much.

[admin]

Hi, thank you for the suggestion. The closest you can have for this is through timelapse: https://saillogger.com/svatlas/timelapse?speed=0

Having a toggle in the monitoring page is a good idea though, let us look into it!

[admin]

Responded in a different thread as well, but posting here as it is essentially the same feature. There is now a setting that allows you to set the tracking starting point on the real-time tracker/monitoring page. Please follow these steps to enable it:

1. Go to your Settings page.
2. There is now a new option called Tracking Page Start.
3. Choose the log that will act as the starting point for the track that will show up on your monitoring/tracking page.
4. If you wish to capture your entire track, choose the very first log you have (the one at the very bottom of the list).
5. Go to your monitoring page, which will show you the entire track starting from the log you chose in step 4.
6. The initial zoom factor will change based on whether you are underway or not.
7. Clearing this setting will revert back to original behavior on the tracking/monitoring page.

[Brazen Article]

Hello - I tried this new feature and I am able to change the Tracking Page Start to different trips but so far I cannot clear the field to turn this feature off. I'm on a MacBook Air using Safari.

[admin]

@Brazen-Article , to clear it, you can go to the same pulldown and choose the empty option at the very top of the list.

[Brazen Article]

That was simple! I didn't realize that empty space was part of the list.
Thanks...