Depth measurement resolution

[digger]

Hello,

It seems like the depth measurement could use a little more resolution. It only displays in foot increments and is nowhere near sinusoidal in shape. The source is I'm using is environment.depth.belowSurface.
With a custom monitor using the same source I get the same results. Our boat has a draft of a bit less than two feet so a 1/10th ft resolution would be welcome.

ls this a setting that would be made in Signal K? I am two hours from the boat and can't look right now, but do hope to get there this coming weekend.

If it makes a difference I'm using a Cerbo GX mk2 and the depth gauge is an Airmar dst810.

Thanks for any help,
digger

[admin]

Hi @digger thanks for the note, it is a good catch. We increased the resolution, you can check again.

[digger]

Looks much nicer, thanks!