Saillogger Community

Having the same problem, no monitoring data. Boat name has not changed. Rpi and openplotter, signalk 2.26.0, signalk-sailloggerv5.1.0. Have removed and reinstalled the Sail Logger plugin, hasn't helped. The log is being update with each sail, just no current monitoring data.

@upstart I'll have to recheck what I set this at next time I get to my boat. Will let you know.
As far as the SD card, I haven't found adding it to help much so doubt the logs are written to it. Not sure how to unload processes or data to it so as to unburden load on the main memory.

I actually updated the module better-sqlite3 in the .signalk folder and that did the trick. Working again!

That's great to hear, thank you for sharing!

Thank you, that's brilliant. i noticed it did record correctly engine hours but I wasn't seeing this reflected when playing back the trip. have now added a monitoring section to include RPM so hopefully this will show up.
so much great information, its brilliant.

Success!
From my limited flipping through zoom levels!

Looks good here i will add to this if it starts showing up again

Thank you for fixing it

I put in my starting position for Jan 1, but I don't understand the logbook.

This year was a few nice trips, but we're not in full-on cruising mode.

image.png

Thank you , that's worked.

Hi @piotr-pingo yes we will update the plugin.

Thank you, Ilker, for your fast reply and help outside of the forum!
digger

@admin Now that explains everything. Thanks.

Hi @mshulman sorry for the delay in responding. Is there a possibility that there were multiple GPS sources at the time this is happening? If multiple sources report slightly different positions it may trigger a movement. If so, and this is happening frequently you can consider limiting your position reports to a single device. It is explained in FAQs.

Thanks! It seems ok now, but I don’t have internet connection anymore, so can’t check all.

ok thanks, just wanted to let you know as the warning was mentioning 2 your plugins. I will happy ignore it now

@Voodoo I don't really need to integrate my 2 old yanmar 4jh4 with the nav system.
Im happy with old fashioned analogue control panels, no need to monitor Bar and Celsius in NMEA or sailllogger. All I would like to achieve is engine status monitoring (running/not running) for trip's logs and statistic.
In my current setup I already have a Victron shunt for engines' alternators (separate 24v 110A alternators) that tiggers "motoring" path in SignalK when minimum 1 engine is running (and alternator charging the house batteries. I can also try using digital inputs of Cerbo to get on/off status control of each engine (we are a catamaran).

Works fine for me obviously for below surface (all other make no sense)

Hi everyone, we just released native support for engine sensors! They are now logged automatically, along with statistics for your sailing and motoring time. Check out the announcement here: https://community.saillogger.com/topic/142/saillogger-plugin-5-x-native-engine-logging