Installation Problem

Gerler

Installing:

And Failed after 2/3 minutes:

Gerler

Update: Did a clean install on Cerbo GX, Updated to 3.60 firmaware Version. Started Signal K Server. Just configure user privileges and tried to install only Saillogger. Get the same Failed message.

Gerler

Let me know if this helps:

Gerler

Gerler

Hello there. After logs analysis, Python update solved the issue.
SH at Cerbo and run this commands:
opkg update
opkg install python3-pip

Take more than 1 hour but worked fine.
Thanks

admin

Ok, glad it is solved but this is super awkward, Saillogger plugin has absolutely nothing to do with Python. There must be something else happening in the system, but not sure what it might have been.

Gerler

Yep, very awkward. An I did a factory reset on Cerbo GX many times and tried with minimal configuration parameters and firmware update. At Signal K Server, just security config, nmea 2000 connection and derived data plugin and always same error. So last resource was to dig at logs with AI and that whtas solved.

admin

Thanks, @Gerler. It turns out the problem is specific to the latest Venus OS (v3.62). Appreciate you uncovering the workaround! We’re coordinating with Victron on a permanent fix. In the meantime, we’ve posted the details here:

Important: Saillogger plugin fails to install on Venus OS v3.62

The latest Victron Venus OS release (v3.62) contains a bug that prevents the Saillogger plugin from installing in Signal K (see attached screenshot). We’re w...

Saillogger Community (community.saillogger.com)

jonnys

Thanks for the update. I experienced the same problem with 3.60 even after a factory reset of cerbo.

admin

@jonnys This issue has been resolved in Saillogger Signal K plugin version 4.2.1. In collaboration with Victron, we fixed it by rebuilding the dependency in a different way. Please install Signal K Saillogger plugin version 4.2.1 and let us see if you see any issues.