Installation Problem
-
Yep, very awkward. An I did a factory reset on Cerbo GX many times and tried with minimal configuration parameters and firmware update. At Signal K Server, just security config, nmea 2000 connection and derived data plugin and always same error. So last resource was to dig at logs with AI and that whtas solved.
-
Thanks, @Gerler. It turns out the problem is specific to the latest Venus OS (v3.62). Appreciate you uncovering the workaround! We’re coordinating with Victron on a permanent fix. In the meantime, we’ve posted the details here:
FIXED: Saillogger plugin fails to install on Venus OS v3.62
IMPORTANT NOTE: This issue has been resolved in Saillogger Signal K plugin version 4.2.1. In collaboration with Victron, we identified the root cause and fix...
Saillogger Community (community.saillogger.com)
-
@jonnys This issue has been resolved in Saillogger Signal K plugin version 4.2.1. In collaboration with Victron, we fixed it by rebuilding the dependency in a different way. Please install Signal K Saillogger plugin version 4.2.1 and let us see if you see any issues.
-
Hello to all saillogger friends, unfortunately I had not read this post before and I installed the 4.2.1 update which obviously did not install. However, there is a variant in my case that I would like to report, I still have version 3.55 and although this version is reported as the one on which 4.2.1 works, in my case it is not installed, could there be a solution in my case?